Features

  • Creates a sterile working space for mycology applications
  • Better protection against contamination than Still Air Boxes
  • H14 Hepa Filter for Hospital-Grade filtration
  • Slim design for an optimized workspace
  • Energy-Efficient Noise-Free Operation
  • Built to last with easy maintenance
  • Available with vertical and horizontal clean booths

FloCube® ProFlow™ 22 Flow Hood – 2′ x 2′

MSRP: $899.95 - $1,499.90

The ProFlow™ 22 Flow Hood creates a sterile environment with plenty of work space for mushroom cultivation and mycology work. The horizontal and vertical clean booths are designed to fit the ProFlo 22 Flow Hood.

Quantity

Total Price:

H14 HEPA Filter Sterility

The FloCube® ProFlow™ 22 features an industry-leading, hospital-grade H14 HEPA filter that captures 99.995% of particles as small as 0.3 microns, helping ensure an ultra-sterile environment ideal for a wide range of mycology applications. Every HEPA filter is individually scan-tested for leaks and airborne particulates that bypass the filter to guarantee the filter meets the removal efficiency required for EN1822:2019 classification.

Slim Design For An Optimized Workspace

The FloCube® ProFlow™ 22 fits comfortably on a 2ft long stainless steel table, providing ample space for mycology lab work. At only 12.8″ deep, the FloCube® ProFlow™ 22 only requires 3″ of space between the pre-filter and the wall to provide adequate air intake for optimal performance.

Energy Efficiency + Noise Free Performance

The upgraded 120V backward curved centrifugal impeller delivers more power and efficient performance, with whisper-quiet operation and reduced energy consumption. 185 watts, 1.6 Amps at Full Power.

Built to Last With Easy Maintenance

Crafted with corrosion-resistant powder coated cold rolled steel, the FloCube® ProFlow™ 22’s sleek design is built for longevity and is sturdy enough to serve you for many years. This flow hood has been designed for easy cleanup and no-fuss filter replacement.

Clean Booth Compatibility

The FloCube® vertical and horizontal clean booths are both designed to fit the FloCube® ProFlow™ Series Laminar Flow Hoods, but also fit other brand FFU’s with HEPA filter size 23.6 x 23.6″ with possible modified mounting.

  • Dimensions: 27” x 27” x 12.8”
  • Weight: 56lbs
  • Flow Rate: 150fpm Average Air Velocity with a Clean Air Delivery Rate (CADR) of up to 400CFM
  • HEPA Filter:  24” x 24″ H14 HEPA Filter 99.995% @ 0.3 microns
  • Pre-Filter: 20x20x1″ MERV 8 Pre-Filter
  • Blower Type: 120V 60hz UL Listed Backwards Centrifugal Impeller with Variable Speed Control
  • Minimum Distance from Wall: 3” 
  • Manufacturer Warranty: 2 years – electronics/motor ; 90 Days – filter

Technical Specifications

Length Inches
Width Inches
Height Inches
Product Weight
Case Quantity
Case Dimensions (L"xW"xH")
Case Weight lbs
Materials
Thickness
Tensil Strength
Climate Suitability
Transmission Rate
Diffusion Rate
Custom Size Option
Size 2' x 2'
Bag Weight
Best Use
Category

Run your flow hood for at least 30 minutes prior to use to ensure a clean air environment. 

Ensure flow hood is always at least 3” from wall for proper operation.

Details

H14 HEPA Filter Sterility

The FloCube® ProFlow™ 22 features an industry-leading, hospital-grade H14 HEPA filter that captures 99.995% of particles as small as 0.3 microns, helping ensure an ultra-sterile environment ideal for a wide range of mycology applications. Every HEPA filter is individually scan-tested for leaks and airborne particulates that bypass the filter to guarantee the filter meets the removal efficiency required for EN1822:2019 classification.

Slim Design For An Optimized Workspace

The FloCube® ProFlow™ 22 fits comfortably on a 2ft long stainless steel table, providing ample space for mycology lab work. At only 12.8″ deep, the FloCube® ProFlow™ 22 only requires 3″ of space between the pre-filter and the wall to provide adequate air intake for optimal performance.

Energy Efficiency + Noise Free Performance

The upgraded 120V backward curved centrifugal impeller delivers more power and efficient performance, with whisper-quiet operation and reduced energy consumption. 185 watts, 1.6 Amps at Full Power.

Built to Last With Easy Maintenance

Crafted with corrosion-resistant powder coated cold rolled steel, the FloCube® ProFlow™ 22’s sleek design is built for longevity and is sturdy enough to serve you for many years. This flow hood has been designed for easy cleanup and no-fuss filter replacement.

Clean Booth Compatibility

The FloCube® vertical and horizontal clean booths are both designed to fit the FloCube® ProFlow™ Series Laminar Flow Hoods, but also fit other brand FFU’s with HEPA filter size 23.6 x 23.6″ with possible modified mounting.

  • Dimensions: 27” x 27” x 12.8”
  • Weight: 56lbs
  • Flow Rate: 150fpm Average Air Velocity with a Clean Air Delivery Rate (CADR) of up to 400CFM
  • HEPA Filter:  24” x 24″ H14 HEPA Filter 99.995% @ 0.3 microns
  • Pre-Filter: 20x20x1″ MERV 8 Pre-Filter
  • Blower Type: 120V 60hz UL Listed Backwards Centrifugal Impeller with Variable Speed Control
  • Minimum Distance from Wall: 3” 
  • Manufacturer Warranty: 2 years – electronics/motor ; 90 Days – filter
Usage

Run your flow hood for at least 30 minutes prior to use to ensure a clean air environment. 

Ensure flow hood is always at least 3” from wall for proper operation.

Mini Cart 0

Your cart is empty.